| THE RACE PLACE SLOT CAR RACING SINCE 1966 |
| 1151 Highway 33, Farmingdale, New Jersey 07727 |
| 732-938-5215 |
1/24 ASPHALT MODIFIED
Saturday Night On The Oval
If It’s Not Mentioned
It’s Not Legal
Chassis: PARMA #577 only. Chassis must be cut to pattern. Wheelbase: 4"
(+/- 1/8"). front wheels may spin independently. All cars must
have rear bumpers made from 1/8-3/16" channel, square,
rectangular, or round brass. All cars must have side bars 1/16"
diameter max/brass. Max width of bars is 3-1/4". All bars must be
approved. Mo other chassis modifications. No drilling or lighten of
chassis. Weight may be added.
Bodies: Approved asphalt type modified body
Tires: Any black foam or rubber
Axles: 1/8 Front and Rear both solid steel only
Gears: any 48 crown pitch gears only
Motor: The ONLY motor allowed in these cars will be the FALCON 7.
Part #JK30207 ( No Modifications)
Track clearance tech will be .047” front to rear
cars may not exceed 3 ¼” width
motors, lead wire, front axles, rear axle bushings,
may be soldered in
you must use body clips
independent front wheels are permitted
may change lead wire
may use any guide flag & nut
remember
If It’s Not Mentioned
It’s Not Legal
Be the best racer you can be
support the sport by being the best
corner marshal you can be
without marshals we have no races
everyone needs to help
thanks
Saturday Night On The Oval
If It’s Not Mentioned
It’s Not Legal
Chassis: PARMA #577 only. Chassis must be cut to pattern. Wheelbase: 4"
(+/- 1/8"). front wheels may spin independently. All cars must
have rear bumpers made from 1/8-3/16" channel, square,
rectangular, or round brass. All cars must have side bars 1/16"
diameter max/brass. Max width of bars is 3-1/4". All bars must be
approved. Mo other chassis modifications. No drilling or lighten of
chassis. Weight may be added.
Bodies: Approved asphalt type modified body
Tires: Any black foam or rubber
Axles: 1/8 Front and Rear both solid steel only
Gears: any 48 crown pitch gears only
Motor: The ONLY motor allowed in these cars will be the FALCON 7.
Part #JK30207 ( No Modifications)
Track clearance tech will be .047” front to rear
cars may not exceed 3 ¼” width
motors, lead wire, front axles, rear axle bushings,
may be soldered in
you must use body clips
independent front wheels are permitted
may change lead wire
may use any guide flag & nut
remember
If It’s Not Mentioned
It’s Not Legal
Be the best racer you can be
support the sport by being the best
corner marshal you can be
without marshals we have no races
everyone needs to help
thanks